For Sale: 1966 Shelby Cobra in Concord, North Carolina for sale in Concord, NC
Vehicle Description STK 2790 1966 Shelby Cobra Replica This exceptional 1966 Shelby Cobra Mark IV is a prime example of what a replicar should be.
The car is an Everett-Morrison 427SC Gen IV, delivered in 2007.
It is constructed around a chassis of 4 round stainless steel tube rails.
The 'hand-laid' vinyl ester resin '427SC' body was finished in Tuxedo Black gel coat w/white stripes.
The black vinyl interior looks as good as the day it was installed and each bucket seat is equipped with a Simpson 4-point racing-style lap/shoulder harness.
A full compliment of gauges is perfectly positioned in the dash and a Pioneer AM/FM/CD player has been installed - but may not sound as good as the side pipes.
Ferrule set stainless steel heat shields lined with wheel-well foam are built into the foot boxes.
A tilt wheel, heater/defroster system and full stainless roll bar complete the package.
Under the hood is a Shelby American aluminum block 427FE that has been stroked to 468ci, balanced and blueprinted.
It was built using Shelby Racing components - forged pistons, H-beam rods, aluminum heads and 'Road Race' baffled oil pan.
It is fitted with a Holley 850cfm double-pumper, electric fuel pump, hydraulic roller cam, roller rockers and E&M oil-cooler system.
A 26 HD radiator with 1-1/4 tubes and a 23 shroud manages cooling.
Exhaust is routed through stainless side pipes and the resulting output is 550bhp-560lb/ft of torque.
The FE big-block is backed by a Tremec TKO 600 5-speed with Centerforce flywheel/clutch and full Lakewood bell housing.
The Trackion Lok aluminum differential houses 8.
8/3.
55:
1 gears and connects billet heat-treated half-shafts.
The suspension is a fully independent EM design that utilizes coil-over shocks and stainless steel control arms.
Brakes are power-assisted 4-wheel disc with 13f/11.
65r rotors and brake cooling ducts.
Compomotive Motosport 17 alloys utilize a 5-bolt pattern, but maintain the vintage Halibrand knock-off appearance.
The 21-gallon fuel tank w/foam baffling can be upgraded to a true racing fuel cell by simply adding a bladder.
This is a serious Cobra and our current owner has taken very good care of it - he is now ready to pass it on to the next caretaker.
If you want a big-block Cobra that you can actually drive and enjoy, this is your car.
ALL VEHICLES SOLD AS IS.
.
The car is an Everett-Morrison 427SC Gen IV, delivered in 2007.
It is constructed around a chassis of 4 round stainless steel tube rails.
The 'hand-laid' vinyl ester resin '427SC' body was finished in Tuxedo Black gel coat w/white stripes.
The black vinyl interior looks as good as the day it was installed and each bucket seat is equipped with a Simpson 4-point racing-style lap/shoulder harness.
A full compliment of gauges is perfectly positioned in the dash and a Pioneer AM/FM/CD player has been installed - but may not sound as good as the side pipes.
Ferrule set stainless steel heat shields lined with wheel-well foam are built into the foot boxes.
A tilt wheel, heater/defroster system and full stainless roll bar complete the package.
Under the hood is a Shelby American aluminum block 427FE that has been stroked to 468ci, balanced and blueprinted.
It was built using Shelby Racing components - forged pistons, H-beam rods, aluminum heads and 'Road Race' baffled oil pan.
It is fitted with a Holley 850cfm double-pumper, electric fuel pump, hydraulic roller cam, roller rockers and E&M oil-cooler system.
A 26 HD radiator with 1-1/4 tubes and a 23 shroud manages cooling.
Exhaust is routed through stainless side pipes and the resulting output is 550bhp-560lb/ft of torque.
The FE big-block is backed by a Tremec TKO 600 5-speed with Centerforce flywheel/clutch and full Lakewood bell housing.
The Trackion Lok aluminum differential houses 8.
8/3.
55:
1 gears and connects billet heat-treated half-shafts.
The suspension is a fully independent EM design that utilizes coil-over shocks and stainless steel control arms.
Brakes are power-assisted 4-wheel disc with 13f/11.
65r rotors and brake cooling ducts.
Compomotive Motosport 17 alloys utilize a 5-bolt pattern, but maintain the vintage Halibrand knock-off appearance.
The 21-gallon fuel tank w/foam baffling can be upgraded to a true racing fuel cell by simply adding a bladder.
This is a serious Cobra and our current owner has taken very good care of it - he is now ready to pass it on to the next caretaker.
If you want a big-block Cobra that you can actually drive and enjoy, this is your car.
ALL VEHICLES SOLD AS IS.
.
|
|